Sanding, sealing and repairing parquet
Turning old into new: Professional removal of dents and damage to parquet flooring
Is your parquet getting on in years and already has a few blemishes? Or is the surface worn and unsightly but still intact? Our flooring professionals can give your floor a refresh!
Parquet floors are durable and hardwearing. Nevertheless, it sometimes requires maintenance or repair.
We can sand, seal, oil and repair your parquet or give it the finish it needs. As Floor layer we can also take care of optional work such as brushing the wood, final sealing, oiling, treating or waxing the surface so that it looks like new again.
Repairing damage to parquet flooring
Damage to the parquet is also no problem. Depending on the severity of the damage the spot is puttyled, filled or the entire plank is replaced..
We can also solve water damage caused by leaking dishwashers, washing machines, etc. without any problems. We are also happy to help with insurance claims and provide the insurance company with an offer to repair the damage. All major insurance companies are listed with us and often rely on our expertise.
Not sure whether a repair is the right choice? We will be happy to provide you with expert advice and find whether the floor should be repaired or completely renewed. restauriert oder doch besser neu verlegt werden sollte.
Sanding and sealing parquet
After coarse, medium and fine sanding, the lacquer primer is applied. This is followed by the first coat of lacquer, which is sanded again with the finest diamond sandpaper after drying. Finally, the final sealant is applied.
Sanding and oiling parquet
The dirty or damaged layer is sanded off with Bona Flexisand or, in the case of very heavy and deep damage, with Pallmann Cobra. The floor is then oiled with a special oil to make it look as good as new again.
Replacing parquet floorboards
In the case of major damage, such as water damage, it is usually better to replace individual planks. This often saves more time and is cheaper than sanding and resealing or oiling the entire parquet.
Sanding, brushing and oiling parquet
Using a special machine, we can water and brush the parquet after the centre sanding to bring out the original brushed feel. This is mainly used for country house floorboards that are bevelled and brushed.
Before and after pictures: sanding and oiling, sealing of a spruce wood floor
Old wooden floor before sanding
The wooden floor sanded
The parquet floor oiled and sealed
FAQ - Frequently asked questions about sanding and sealing parquet floors
When can parquet be sanded?
Your parquet floor can be sanded from a wear layer of three millimetres. This can be done up to three times during its service life. Solid parquet can be sanded more often without any problems. Depending on the wear and tear on the floor, renovation of the parquet is recommended after 15 to 20 years. With careful handling, a parquet floor can therefore last for many decades.
How long does it take to sand and seal parquet?
The duration of the repair depends entirely on the size of the parquet surface. For 30 to 40 square metres, you can expect about two days. On the first day, the surface is roughly and medium-fine sanded, on the second day it is finely sanded, varnished or oiled and polished. If the floor is also sealed, one more working day can be expected due to the drying time. For larger areas, a consultation is carried out on site in order to draw up a more precise schedule.
Can the floor be walked on during this time?
As long as the floor is being sanded, it can still be walked on. Walking on the floor is prohibited after the first sealant or primer has been applied. Wait at least 12 hours until the surface is completely dry after the final sealing. It can then be walked on carefully. Three sealing processes are necessary. After oiling, it is best not to walk on the floor for up to 48 hours.
Is it possible to extend the life of a parquet floor without sanding?
Sanding the floor can be delayed with the help of special floor cleaners. Using a suitable machine and cleaning agent, dirt can be removed from between the wood fibres of the parquet surface. The wood is then resealed or treated.
Cleaning is usually used for floors with a wear layer of less than 1.5 millimetres to prevent sanding. However, the process should only be used every 5 years or so.
What do I need to consider after the refurbishment?
After oiling, the floor must not be wiped with a damp cloth for 14 days - up to 5 days for sealing, depending on the lacquer. 2K lacquers can be wiped or walked on more quickly. In addition, no carpets, painter's fleece or other vapour-proof materials should be placed on the parquet or furniture placed on the parquet during this time.
What does dust-free sanding mean?
The wood dust produced during sanding is very fine. However, by extracting it with a special hoover during the sanding process, it does not get into the air or onto objects.
The coarse dust, which is mainly produced during the first two sanding steps, is immediately extracted by a powerful dual-motor hoover. The rooms are not clinically clean as a result, but are sanded largely dust-free. It is therefore no longer necessary to cover the fitted furniture, kitchen, etc.
Customer testimonials
DE 
EN 
NL